It is currently 28 Jun 2017, 03:00



Effect from x, y to width, height using mixer

Moderators: Macey, Jonas Hummelstrand, didikunz

Effect from x, y to width, height using mixer

Postby jambel » 08 Dec 2016, 13:25

Hi,

is there any way to use mixer or something else to create an effect like this?
https://drive.google.com/open?id=0B9my9 ... BGZFBleGw0

The tweet card is a png image.

Thanks in advance.
jambel
 
Posts: 20
Joined: 15 Nov 2015, 03:26

Re: Effect from x, y to width, height using mixer

Postby didikunz » 08 Dec 2016, 14:39

jambel wrote:Hi,

is there any way to use mixer or something else to create an effect like this?
https://drive.google.com/open?id=0B9my9 ... BGZFBleGw0

The tweet card is a png image.

Thanks in advance.


Sure, you could use a mixer effect.

I would build a Flash template that loads the image and does the effect. I think that would be easier. Where does the PNG comes from? Because you could easy build a template in Flash or HTML 5 that renders this graphics directly from the Twitter data.
Didi Kunz
CasparCG Client-Programmer, Template Maker & Live CG-Operator
Media Support, CH-5722 Gränichen, Switzerland http://mediasupport.ch/
Problems? Guide to posting Bug reports & Feature requests
User avatar
didikunz
 
Posts: 3479
Joined: 10 May 2010, 09:08
Location: Aarau, Switzerland

Re: Effect from x, y to width, height using mixer

Postby jambel » 08 Dec 2016, 14:57

Thanks for the answer!

I use the png's that produced by my tweetblender project (viewtopic.php?f=9&t=3916)

I try the MIXER 1-3 FILL 1 1 0.1 0.1 10 easeinsine and then play 1-3 <file> but I had the opposite result, the image disappeared, it's good for outro but nor for intro :)

I don't know flash unfortunately. Can you provide some HTML5 examples? Not necessarily describe my request.
jambel
 
Posts: 20
Joined: 15 Nov 2015, 03:26

Re: Effect from x, y to width, height using mixer

Postby didikunz » 08 Dec 2016, 15:52

That's right, you should send that command beforehand (with a durration of 0 or 1) and then send a command to reset to to fullscreen to bring it in, like so:

MIXER 1-3 FILL 0 0 1 1 10 easeinsine
Didi Kunz
CasparCG Client-Programmer, Template Maker & Live CG-Operator
Media Support, CH-5722 Gränichen, Switzerland http://mediasupport.ch/
Problems? Guide to posting Bug reports & Feature requests
User avatar
didikunz
 
Posts: 3479
Joined: 10 May 2010, 09:08
Location: Aarau, Switzerland

Re: Effect from x, y to width, height using mixer

Postby jambel » 08 Dec 2016, 16:16

Thanks that works fine, but can I have the effect from the upper side than the bottom?
I did:
<add key="CasparImageIn" value="MIXER 1-3 FILL 0 0 1 1 10 easeinsine; PLAY 1-3 {filename}"/>
<add key="CasparImageOut" value="MIXER 1-3 FILL 1 1 0.1 0.1 10 easeinsine"/>

this is my xml config of tweetblender, it split commands with semicolon.

It works fine but I need the opposite. The effect coming from top.
jambel
 
Posts: 20
Joined: 15 Nov 2015, 03:26

Re: Effect from x, y to width, height using mixer

Postby jambel » 08 Dec 2016, 16:22

jambel
 
Posts: 20
Joined: 15 Nov 2015, 03:26

Re: Effect from x, y to width, height using mixer

Postby didikunz » 08 Dec 2016, 16:50

It's all writen here, how to specify the coordinates:
http://casparcg.com/wiki/CasparCG_2.1_AMCP_Protocol#MIXER_FILL
Didi Kunz
CasparCG Client-Programmer, Template Maker & Live CG-Operator
Media Support, CH-5722 Gränichen, Switzerland http://mediasupport.ch/
Problems? Guide to posting Bug reports & Feature requests
User avatar
didikunz
 
Posts: 3479
Joined: 10 May 2010, 09:08
Location: Aarau, Switzerland

Re: Effect from x, y to width, height using mixer

Postby jambel » 08 Dec 2016, 17:02

Thank you!
jambel
 
Posts: 20
Joined: 15 Nov 2015, 03:26


Return to General discussions

Who is online

Users browsing this forum: Bing [Bot] and 3 guests