Is there a guide on how to set up CasparCG to use 3G-1080p formats? I noticed Jonas made a post previously stating that you guys have done testing confirming that 3G-1080p is possible using CasparCG, but I haven't been able to find any instructions on how to set up the Caspar server to handle this case properly.
I have Caspar set up on a server with two separate 3G-capable Blackmagic cards (one HD 3D Extreme and one 4K extreme). I tried changing the video format in Caspar to 1080p50/59.94/60 in the configuration file and adding both cards as consumers, but I'm not getting any video signal on my ATEM at the corresponding formats.Yes, we've tested 1080p5000 output from CasparCG Server 2.0.x but since this requires using both SDI outputs on the DeckLink HD Extreme 3D card, this means that synchronized fill+key output is not supported for 1080p5000 and 1080p5994. You would need dual cards, one for fill, the other for key, and then you would get the potential timing problems of the channels not being permanently synchronized if a channel dropped a frame.
Any idea why this is happening? 1080p2997 works fine with Caspar, so it seems to me like there must be some special configuration I need to do in order to get Caspar to output fill on one card and key on the other at these 3G-1080p formats. I've tried toggling the key-only option for both cards, but still no dice.
Thanks for your time / help!