Search found 659 matches

Re: Simple Video Playout

You need to make a single playlist for all future telecast, fill the gap in playlist with "follow duration method" and use the "Start Playlist at" button for starting only once.

Once it is started at given time, no need to again start it and no need to load another playlist.
Start_playlist_at.png
Start_playlist_at.png (1.05 KiB) Viewed 2518 times

Re: Simple Video Playout

Is possible add into playlist schedule every line date and time to play content. There is a column in playlist "follow duration". If we check it and put "02:00:00" in duration column, then this clip will be online for 2 hours. So if we put a blank png image file with follow duration checked and dur...

Re: Simple Video Playout

That is something which I have not been able to avoid. And it has been left unattended considering other things required to fulfill faithful playlist feature. That is why mix 10 frames has been kept to avoid getting notice of this freezing. Mr Vimlesh, is there any chance to fix this? Frame accurat...

Re: Audio Channels on SDI

Here is a config file for server 2.1 which gives 16 channel output if a stereo file is played. Here I have defined a channel layout as "mylayout" and channel type as "mytype". <?xml version="1.0" encoding="utf-8"?> <configuration> <paths> <media-path>C:/CASPARCG/_MEDIA\</media-path> <log-path>log/</...

Re: Simple Video Playout

Below is a config file which generates 3 channel. When we give command channel_grid third channel switches to a grid view of 1st and 2nd channel. Open two instances of CMP and set 2nd instance channel number to 2. In 1st channel go to recorder and click show input. It will enable live video in chann...

Re: Audio Channels on SDI

Here is configuration file for server 2.1 beta 2 which gives 8 channel output if stereo file is played. <?xml version="1.0" encoding="utf-8"?> <configuration> <paths> <media-path>media/</media-path> <log-path>log/</log-path> <data-path>data/</data-path> <template-path>template/</template-path> <thum...

Re: Audio Channels on SDI

I tested in server 2.07. And following configuration file works fine. <?xml version="1.0" encoding="utf-8"?> <configuration> <paths> <media-path>c:/casparcg/_media\</media-path> <log-path>log\</log-path> <data-path>data\</data-path> <template-path>c:/casparcg\</template-path> <thumbnails-path>thumbn...

Re: Simple Video Playout

Hello sir, I am trying to use the CG2 to bring in graphics to VMIX, using NDI I am able to pick the output screen but it just don't overlay it plays as a full video. Can you assist please. Server 2.07 not working. But 2.1 beta 2 works well. Information from here. https://www.vmix.com/knowledgebase/...

Re: Simple Video Playout

Making symbolic link of root drive creates this problem.
Suppose your mapped drive is z:
Make a folder in it as _media
Put your media in this folder.
Open command prompt as administrator and issue a command like below

Code: Select all

mklink /d c:\casparcg\_media\media_on_z_drive z:\_media
/[code]

Re: Simple Video Playout

did cmp cant play *.mxf video ? cz when im using caspar client it's, play just fine,.but cmp cant play it.. Playing mxf file is a property of server and cmp also can give a command to play mxf file. \\192.168.10.4\data$ >> this is my video link,. btw its on network,. i add map network drive on my p...

Re: Simple Video Playout

HUDis wrote:
07 Feb 2018, 10:49
I think it would be convenient to see all installed templates in the drop-down menu in the modules.
This can be done but other templates may not have fields as f0 and f1. And then they will not work.

Re: Simple Video Playout

Sorry for late reply, but your earlier explanation was not complete.
New templates will not be listed there in twoliner module. They are listed for example purpose. You will have to copy the name of the template manually there.

Re: How to enable blend mode

I tried it again and found the same result. I tested for PAL and 1080i5000 mode. I tested with develop build from https://caspar.julusian.co.uk/develop/ also with same result. commands paly 1-1 go1080p25 play 1-2 amb mixer 1-2 blend add But blend effect is only visible/applied when command mixer 1-2...

Re: Simple Video Playout

Thank you for your feedback. I found the feature request very useful. I have added a new column in playlist named AMCP. Now we can add any amcp command here which will play with corresponding clip in playlist. Command can be multiline separated with double comma. (,,) Above feature may be called as ...

Re: Simple Video Playout

Thank you for giving feedback. 1. I think if you configure media path as d:/ instead of d:// problem would be solved. But I would say to configure it like d:/casaparcg/_media/ 2. It should play all files. If current file is of different frame rate than channel frame rate, playlist may not switch to ...

Re: Simple Video Playout

DT100 wrote:
03 Nov 2017, 13:10
Unfortunately, I've found something else that's stopped working (sorry!)
So sorry to be a pain, and thanks again :)
I welcome the feedback. Every feedback helps to make this client better.
I have changed some logic in the client. I think you should follow the sequence- play, pause and then resume.

Re: Help with lower thirds

Making a template which will take data from xml file is another topic. But if this has been done, playing graphics template automatically in a playlist can be done. Automating graphics has been done in two types. 1. File time based 2. System time based. In your case it is file time based. It has bee...

Re: 16ch Audio from Decklink Input

Try following <channels> <channel> <video-mode>PAL</video-mode> <channel-layout>16ch</channel-layout> <consumers> <decklink> <device>1</device> <embedded-audio>true</embedded-audio> <channel-layout>16ch</channel-layout> <keyer>internal</keyer> </decklink> Put your required video mode. No need of pla...

Re: Simple Video Playout

As I understand you need to control your kahuna mixer with this client. VDCP controller module is in "menu-other modules-external software". It was tested and developed using sony xds-pd1000. Source code is available in download. If kahuna mixer supports VDCP, has storage and clips in it and a a rs ...

Re: ffmpeg encoding parameters

I used following command and got top field first. I set channel as 1080i5000. Server 2.1 24 April 2017. ADD 1 FILE "/test.mxf" -b 50000000 -acodec pcm_s24le -vcodec mpeg2video -pix_fmt yuv422p -alternate_scan 1 -g 12 -bf 2 -minrate 50000k -maxrate 50000k -timecode 17:28:07:10 -metadata creation_time...

Re: Simple Video Playout

Is there a way to overlay graphic (png, or cg) only for selected files? A column like filter where I can choose file / template)? Is there a way to select overlay graphic start and stop? (Start at the top of file 001, then 002, 003...stop at the end of file 00x) 3) a way to schedule HS1, HS2, and R...

Re: Simple Video Playout

Thank you for testing this software and giving feedback.

In the playlist we can write by typing in place of filename. Remove the lock if locked and double click in filename cell to type or paste following line.

Code: Select all

dshow://video=SplitCam Video Driver

Go to advanced search